Air filter frolics

Athena CA8925 air filter to replace Aprilia AP8104169I mentioned recently that I’d ordered a batch of air filters made by Athena in Italy. They’re a direct replacement for the Aprilia AP8104169 one and the only obvious difference is the black foam material instead of orange, and that’s fine and dandy with me. However, on stripping out the old filter I noticed for the first time (that I can recall!), it has a code on the end …. hmmmm ….. could it be a viable manufacturers code I wonder?

Hmmm what's the code mean then Sherlock?A few minutes on the web confirmed that the number is definitely a manufacturers code – not Aprilia, but FIAAM. A bit more digging unearthed a total of three cross-referance numbers. Tecneco AR9474PM, FRAM CA9474 and FIAAM PA7301. The downside? All of them seem to be obsolete, with FRAM/FIAMM saying they went out of production in March 2012! Buggeration ……

But … one of the sites I found listed a filter that is an almost identical footprint to the OEM one:-

Aprilia OEM          210 x 140 x 30

FIAAM PA7180   212 x 140 x 60

Now a 2mm length difference is peanuts – the OEM one can be stretched/compressed by 10mm easily, the problem may well be the height, at 60mm it’s double the OEM filter. So to try to find out I took some pics of the airbox with the OEM filter in and had a play in Photoshop. Here’s the outcome.

Photoshop airboxThe vertical lines show where the filter ends or interferes with the frame or lid. As you can see, the 60mm high PA7180 will squash in at the ends …… will this be enough to restrict air Athena box label for the Capoflow, or will the greater surface area of the larger pleats compensate? Answers on the back of a crisp £20 note if you please! 😀

Next time I’m passing a motor-factors, I’ll order one and have a play. At £4.68 each they’re half the price of the Athena …. and that brings me nicely back onto track, the new Athena filters that turned up today. What are they like then eh?Embossed pleats

Well, dimensionally it’s an exact copy, so the fit is absolutely fine. One nice touch is the embossed pleats. It keeps them evenly separated for better air flow unlike the OEM element that is simply made of folded paper where the pleats can collapse onto each other. The bottom line is that it fits well, looks better constructed and is substantilly cheaper than OEM (€8.35 each from Germany) …… oh and it comes in a nice shiny box!

3 Replies to “Air filter frolics”

  1. Hello,
    based on my measurement, the air filter size is: 215×140
    On Sofima web page, using the size->type converter, the SOFIMA S3057A is found to be competitive replacement. and SOFIMA gave this cross reference:
    30.057.00 UFI
    1457433743 BOSCH
    S3743 BOSCH
    U702 CHAMPION
    1444-Q5 CITROEN
    MA1079 CLEAN FILTERS
    8060 CROSLAND
    **PA7180 FIAAM** This is the one mentioned in the article
    CA5673 FRAM
    ELP3657 MECAFILTER
    C2282 MANN+HUMMEL
    AI5158 PBR
    A309 PURFLUX
    A17690 PUROLATOR
    7701040285 RENAULT
    A472 TECNOCAR
    AE2259 UNICO FILTER
    LX475 KNECHT-MAHLE
    MD9358 ALCO FILTERS
    P057 MISFAT
    AP133 FILTRON
    WA6314 WIX EUROPE

  2. Tested, the height is not an issue. Works well. The first 1-2 waves most be fold down a little bit, that is all.
    I put FILTRON AP 133 in.

Comments are closed.