The Fissure King

Civitaquana, Abruzzo - Cda di Ginestre road (strada) subsidance & landslideWhat good is a motorbike or a car for that matter, if you don’t have a road to run along?

About 10 days ago Jan and I went to do the weekly shopping and I must admit I was already starting to get a little nervous about movement within the road – In one particular place the Range Rover was beginning to bottom out bodywork even when on its highest suspension settings and the traction control was starting to make itself useful when hauling us up the slope.

The next evening after walking the dogs and eyeing the recent movement and ever bigger crack in the adjacent field, I felt very uneasy …..

….. with the dogs tucked up for the night I grabbed the keys and decided to move the car beyond the bad section. In the end it took 3 attempts to clear it, but the good old Rangey did brilliantly with the traction control working overtime as it clawed its way over. That was it then – no going back. Life would be different for the forseeable future for sure.

That was over a week ago ….. since then the land has moved something like 2m down and 3m sideways with more cracks and fissures appearing across its width, soon the road will have separated completely with a section about 30m long moving inevitably down into the valley below.

The reality of our predicament is sinking in …. moving anything, shopping, gas cylinders, rubbish bags etc has to be carefully thought through. Each item has to be carried by hand over ankle-breaking terrain up (or down depending on which way you’re going!) a 200m stretch of steep road that is changing every 24hrs.

The fact is, this road doesn’t belong to us, it belongs to the Comune (Council) and as such they have responsibility over it. It’s not like this problem is new either, in fact we were promised it would be repaired and resurfaced throughout 2014, it wasn’t and now the problem is a magnitude worse. Unfortunately all I can say is we’re disheartened by the lack of response to our emails and phone calls for assistance over the past week.

So until something spectacular happens it gives me time to dream up new and novel ways to free the Capo from its incarceration …… zip wire over the valley, kids balloons tied together (I’ve seen ‘UP’) or turn it into an X-2 Skycycle and fly the bugger out!

Anyway until then, chin up ….. and do what Brits do best in a crisis

KEEP CALM AND DRINK MORE TEA!

 

ACIM VII 2015 update

ACIM VII 2015 Aprilia Caponord International Meeting - Nafplio (Greece)A quick ACIM VII 2015 update – In my original post I said it will be held at Argos (Greece). Well Trikkas (Iania) kindly pointed out my mistake – it is actually being held in Nafplio Argolida about 12Km south from Argos. Yes folks bring yer buckets and spades ….. we’re going to be by the seaside!! 😀

Stuff …. 6 months and 12 months on

Aprilia Caponord ETV1000 Rally-Raid dashboard - new right-hand indicator repeater!A couple of anniversaries this week ….. firstly the dashboard. Yes a full 12 months since it was finished and put back into the Capo for the last time, resplendent with its new inlay to complement the electronic changes. The auto-dimming back lighting and split indicator repeaters have been absolute winners – I couldn’t go back to a standard board again without missing them. Moving the side-stand and low-fuel lights toAprilia Caponord ETV1000 & Rally-Raid Voltmeter and re-located side-stand light on dashboard accommodate the twin indicator repeaters has had no impact, positive or negative. The voltmeter has been a different kettle of fish …. generally unused as the Sparkbight battery monitor handles voltage feedback when riding around – however it has proved a real benefit during start-up when the dashboard goes through its self-test phase. Now it’s become second nature to eye-ball the tacho needle to see what the battery voltage is pre-start. >12.6v and I know I should get a good kick from the battery!

Aprilia Caponord ETV1000 & Rally-Raid MCCruise controlThe second anniversary, although shorter at 6 months and a tad over 11K miles, is the MCCruise cruise control. After a rushed install (not clever) I knew I had a heavier throttle than pre-installation ….. this was purely down to throttle cable routing and nothing to do with the cruise control itself. It simply didn’t like being re-routed behind the radiator, so I gave up and relocated the CIU (cable interface unit) to a new location by the throttle bodies. Now everything works fine – a light throttle and a happy cruise control. It’s been 100% Aprilia Caponord ETV1000 & Rally-Raid New MCCruise CIU locationreliable and functional. As a demonstration of its finesse I ran the bike in 1st gear at 25mph and let the cruise control take over the (100 horsepower!) throttle – all I can say is WOW! I would never have believed that the system could have the sensitivity to operate the throttle with such precision, but it did – up hill, down dale – never an ounce of jerkiness. Ok I admit no one wants to ride around in 1st gear …. but as an experiment, it proved to me that MCCruise have indeed developed an absolutely fantastic piece of kit.

A pivotal moment

Aprilia Caponord ETV1000 & Rally-Raid rear brake lever pivot and grease nipple CAD graphicSometime last year I decided that 2015 was going to be the year that a whole bunch of parts were going to get cleaned up and recoated – engine/sump protection bars (especially the mounting brackets), headlamp guard and passenger foot peg hangers for a start.

The accessory parts seem to be made substantially cheaper than the bike parts themselves – stamped, pressed, bent and welded with a flash of cheap paint to top it off. All well and good for a couple of years, but the elements soon work their magic and the stuff begins to look jaded and rusty. No, if you want it to look good and last, you’ve got to pick up where the Aprilia contractor left off ….. Debur, remove weld spatter and radius any and all sharp edges you can find, THEN get a quality finish applied. That’s the plan anyway!

Aprilia Caponord ETV1000 & Rally-Raid rear brake pedal and grease nippleSo to kick off I took the spare rear brake lever and began to radius the sharp edges and smooth the lumpy stamped (or laser cut) edge … I have to say it was looking (and feeling) rather nice when I downed tools and wandered indoors for a brew.

It was while standing there aimlessly waiting for the kettle to boil that I thought about adding a grease nipple to the pivot – Aprilia have done a good job in making the bolt grooved to hold a reservoir of grease AND fitting two ‘O’-rings (OR114 – 1.78mm section / 11.11mm ID) to keep the grease in …… but a grease nipple would make packing the grease in and replacing it soooooo much easier!

In the end it only took 30 minutes ….. grinding a flat on the underside, drilling and tapping a 6mm hole and screwing in a 90° fitting. What do you think?