TuneECU IS your friend … just don’t forget it!

Aprilia Caponord ETV1000 Rally-Raid TuneECU TPS resetI’ve just had a fun few hours preparing the Capo for its MOT (annual inspection) and one of the issues I wanted to get around to sorting was the slightly high tick-over.

For quite a few months now the idle has been 1,500 – 1,550 when warm – not enough to be troublesome, but noticeable. Problem is ….. I’ve plain forgot to do anything about it once the ignition was turned off! So today I dusted off the cable and charged the old ASUS notebook and plugged in.

Thankfully it was just as I hoped, the TPS (Throttle Position Sensor) was not at zero with a closed throttle. It was reading 1%. A tap on the ‘TPS Reset’ had it reading 0% and the idle was fine once again. So, the question is, have I got a TPS on its way out, or was it simply the fact that I hadn’t done a reset in 18 months ( 20K+ miles), something I used to do at every service. I’m hoping it’s the latter and will endevour to make sure I hook up TuneECU during all future services. Funny really that a tool I used to hook up on an almost weekly basis slowly slid to the dark recesses of the workshop over time.

The Eagle has landed ……

We all like a bargain ….. more than ever at this time of year judging by the British press (Black Friday), so I have to admit I had a grin like a Cheshire cat as I rode back home late Saturday in the dwindling light and rain. Why?

Well on Friday, while some folk lost all sense of self-respect fighting over 40″ TV’s and coffee grinders, I’d stumbled across a fresh advert on a small online marketplace. A couple of calls later and I’d arranged a trip over to l’Aquila the following day, to bag myself a lovely load of Caponord spares for the princely sum of ….. well let’s just say we never got out of double-digits! Here’s a breakdown of what I got from a low mileage 2005 ABS model:-

  • Throttle body including injectors, TPS and throttle cables
  • Aprilia Caponord ETV1000 Rally-Raid & Futura - Fuel injector & sealsABS pump, mounts, sensors and wiring loom
  • Rear brake caliper, bracket, pump, pedal and brake light switch – with footrest
  • Sidestand and switch – with footrest
  • Oil cooler and mounting brackets
  • Coolant tank, cover and mounting brackets
  • Main wiring loom including relays and diode block
  • 4x HT leads
  • Drive chain slipper block
  • Gear lever
  • chainguard
  • And last but not least … a box of assorted plastics.

It also transpires that he may well have the swing arm as well – €15 to you guvner and €5 postage …. I’m just waiting for the confirmation and that’s my birthay present sorted! 🙂 Unfortunately, no wheels/discs. They’d been sold along with the forks for (wait for it) €150 ……. 🙁

So after stripping the throttle body and ordering up new seals, I decided to model up the manifold/injectors. Click on the injector picture above to open the fully exploded manifold and below are a couple of views of the whole assembly.